It's not clear how the leg "brace" is attaced at the leg end but I believe that's the adjustment fixture point. And the leg stud allows even closer use of the head of could allow use of the head on the leg with the leg sections collapsed, which might allow it to be closer to the ground than flattening the leg angles. The slotted end allowed limited movement out to a typical leg angle, when the leg was loosened further, it could be extended to flatter angles allowing use quite close to the ground. On the U-1xx series there was a "wingnut" IIRC that allowed adjustment of the angle brace between the leg and the central spider assembly. If replacing with a head requiring the 3/8" screw mount, there are bushings available which will easily adapt the larger head thread to the 1/4" stud. The head's two long rubberized handles control both the horizontal and vertical movements, and allows for quick and easy orientation. Ailun Tripod Phone Mount Holder Head Standard Screw Adapter Rotatable Digtal Camera Bracket Selfie Lens Monopod Adjustable Ring Light for Camcorder,Compatible for Most Cellphones iPhone. It is compact and lightweight, ideal for use with the average film or digital SLR camera and lens. This item: SLIK 618-752 Replacement Quick Post for Tripod U-212DX. It's designed to allow movement of the head to the stud that can be found on the base of the center post or also on one (maybe all?) of the legs. The Slik SH-704E Three-Way Pan/Tilt Head is a 3-way pan/tilt tripod head with a quick release. You should be able to unscrew the head, turning it counter clockwise (looking down from above) but it may require some force to do so if you've never had it off. I believe it's the part marked as 0571 on the pdfs. The head is on a "standard" 1/4" stud, the same as used to connect cameras to tripods (as opposed to the 3/8" stud found on most "European" or "professional" tripods.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |